Category Archives: Routers

NetGear N600 Wireless Dual Band Router WNDR3400

NetGear N600 Wireless Dual Band Router WNDR3400 Review

It is a bit difficult to classify the Netgear N600 Wireless Dual Band Router WNDR3400. On a single hands her stellar performance featuring of the high-finish router alternatively, it does not support Gigabit Ethernet, an absence that’s only present in budget low-finish routers. In the street cost of around $80, however, a great deal nevertheless.

The WNDR3400 offers all-around great wireless performance on the two.4GHz and 5GHz bands with excellent range, especially around the 2.4GHz band. In addition to the insufficient Gigabit Ethernet, the only real other complaint we’ve may be the network storage throughput speed, that is mediocre. However, this really is common among routers with similar features.

If you are searching for any well-rounded router for your house and don’t wish to spend much, the WNDR3400 may be worth every cent.
Design and setup

The N600 Wireless Dual Band Router WNDR3400 router looks similar to part of Netgear’s RangeMax group of routers and access points. On the top, right in the center of the sleek black surface, it features a big, round blue button adorned with eight little Brought lights that supposedly represent the directions where the antennas are directed. Like the majority of Netgear routers and access points, the WNDR3400 comes with an internal antenna design, which makes it smaller sized and tidier than routers with exterior antennas. This big blue button can also be dubbed the Wi-Fi Protected Setup button. Press you and it will begin a couple-minute window of your time by which other WPS-enabled devices can go into the network.

Around the back, the router has four LAN ports (for wired clients) and something WAN port (to become linked to an online source like a broadband modem). These ports, regrettably, are regular 10/100Mbps Ethernet. Close to the ports would be the Wi-Fi on/off switch along with a USB 2. port for hosting an exterior hard disk for that router’s network storage feature.

Around the front, the WNDR3400 has a range of Brought lights that demonstrate the status from the network ports, the internet connection, the USB port, and so forth. The router has two removable ft which allow results within the vertical position.

The router has a setup application known as Netgear Genie which includes detailed step-by-step instructions. The instructions are extremely obvious that people believe couple of might have trouble obtaining the router ready to go. We could achieve this within a few minutes, such as the time spent obtaining the router as they are. Note, however, it is really an early form of Netgear Genie. During CES 2011, Netgear announced an infinitely more advanced form of the program that may perform a lot not only help setup the unit.

Features

The WNDR3400 may be the second true dual-band router we have reviewed from Netgear, following a WNDR3700. What this means is it’s able to concurrently broadcasting Wireless-N signals on the two.4GHz and 5GHz frequencies. The Two.4GHz may be the popular wireless band distributed to other home devices for example cordless phones and Bluetooth headsets. The 5GHz band is sort of more exclusive and for that reason should offer better throughput performance. When you are dual-band, the WNDR3400 supports almost all existing network clients.

Netgear offers another dual-band router, the WNDR3300, which can be employed in just one band at any given time. For the reason that sense, the WNDR3400 is a huge upgrade.

Such as the WNDR3700, as they are, the WNDR3400 has two wireless systems, one for every band. You are able to turn these systems off or on individually using the router’s Web interface. Aside from these, the router offers a choice of another two guest systems–one for every band–which may also be switched off or on individually. A guest network is helpful if you wish to offer free Access to the internet to visitors and keep them from being able to access the local sources just like your printer or data. A great feature for any small coffee shop or restaurant.

Again, such as the WNDR3700, the WNDR3400 posseses an NAS function that needs an exterior USB hard disk (not incorporated) to operate. We attempted it having a couple of exterior hard disk drives and were happy with how this selection labored, though we wanted it were faster. The router supports hard disk drives formatted both in NTFS and FAT32 file systems. Which means you can simply connect your present exterior hard disk with data already onto it and share it with all of those other network. The router may also power compact hard disk drives which are USB bus-powered. The router manages its storage via Netgear’s ReadyShare feature, also is employed for the business’s NAS servers. The router supports Windows’ SMB protocol, which enables any computer within the network to gain access to its storage utilizing a network browser (for example Home windows Explorer) without getting any extra software installed. Additionally, it supports Macs and also the shares will instantly come in Finder.

The router’s only way of restricting use of its storage is by password. For instance, you are able to set your password for read-only access and the other for read/write access to particular folder around the exterior hard disk. Once set, the restriction is used to anybody attempting to access that folder. This can be a primitive but efficient way to handle network storage. Most NAS servers use more complex restriction protocols via user accounts. However, thinking about the truth that this really is mainly a router, i was pleased with this degree of restriction.

The router’s NAS feature may also handle other NAS functions for example FTP and HTTP. You may also setup remote connections to gain access to the information via Internet. To get this done, however, you will have to make use of a dynamic DNS service, for example Dyndns.org, unless of course your internet connection includes a static Ip.

The 2nd feature that people enjoy concerning the WNDR3400 is its Traffic Meter, which enables you to definitely control the router’s bandwidth. For instance, you are able to set the router to disconnect from the web if some data continues to be downloaded (or submitted, or both) more than a certain time period. This really is helpful if you have a restricted quota and don’t wish to review. Regrettably, the Traffic Meter does not provide the bandwidth control for individual computers. Which means you can’t utilize it to limit one person from installing an excessive amount of.

The WNDR3400 also provides the Live Parental Controls feature which was first introduced with Netgear’s WNR2000 router. This selection needs a dynamic DNS account with OpenDNS, that is free. You are able to setup this selection by using the Live Parental Controls setup software in the incorporated CD and it’ll walk you although the short installation processes. When the setup is performed, you have access to and control the router’s comprehensive Web-filtering function, from all over the world, by signing in to http://netgear.opendns.com.

Like the majority of RangeMax routers, the WNDR3400 includes a very intuitive and responsive Web interface, making handling the router a enjoyable job. The router also offers a number of other features present in most RangeMax routers, for example Content Filtering, which helps you to block certain Internet sites or services, port forwarding, Service quality, and Universal Plug and Play.

For security, the router supports all existing wireless file encryption methods including WEP, WPA, and WPA2. Additionally, it includes Wi-Fi Protected Setup features that permit you to give a new client towards the network in the press of the mouse, rather of getting to enter in the file encryption key by hand.

Performance

The Netgear N600 Wireless Dual Band Router WNDR3400 offered excellent wireless performance within our testing, although its network storage throughput speed can use some improvement. We tested the router in dual-band mode, as well as tested it the way you test other NAS servers.

The router’s wireless performance was among the best we have observed in true dual-band routers. On CNET Labs’ max throughput test, in which the router is 15 ft in the client, the WND3400 registered 75.8Mbps around the 5GHz band and 65.4Mbps around the 2.4GHz band. It had been the 2nd fastest around the former and also the fastest around the latter of all routers we have reviewed. At these speeds, the router can transmit 500MB of information within 52 seconds and 62 seconds around the 5GHz band as well as on 2.4GHz band, correspondingly.

Inside a range test, where the router was placed 100 ft from the client, it again did impressively at 59.8Mbps around the 5GHz band, topping the charts. Around the 2.4GHz band, it did slightly worse at 37.1Mbps, getting third put on our charts.

Within the mixed mode test, in which the router was set to utilize both Wireless-N and legacy Wireless-G and B clients, the score was among the best we have seen at 59.7Mbps. We tested the mixed mode only around the 2.4GHz bands, as generally legacy clients avoid using the 5GHz band.

The WNDR3400 also provides great range, as much as 300 ft around the 2.4GHz band and 250 ft around the 5GHz band. Note, however, that at these distances, the wireless connections are just great for light Web surfing and never anything else. It is best to make use of the router within 100 ft. The router also passed our 48-hour stress test, where it’d to maneuver a lot of data backwards and forwards between multiple clients. I did not disconnect once.

Like several routers we have seen having a built-in network storage function, the WNDR3400 did not have extremely fast throughput performance for data accessibility USB exterior hard disk linked to its USB port. We tested this via network cable and also the scores were around 45.6Mbps for writing and 54.6Mbps for studying. They were concerning the slowest on the charts. With this sort of performance, the WNDR3400 is equipped to light and fundamental network storage tasks, by which just one or two users have access to the drive simultaneously. If you wish to assign the storage to multiple users and transfer lots of data, you may need a dedicated NAS server.